A-910P SS Gun Conventional
SKU:
L015013
CA$0.00
per item
The A-910P conventional air spray gun is designed for furniture fine finishing, auto body shops, metal fabrication shops, contractors and hobbyists. This metal gun is durable.
Price: $171.99 USD plus shipping.
Please call 1-866-8LEMMER (1-866-853-6637) or email [email protected] for detailed shipping costs.
he pressure feed gun is used with a remote pressure pot or a transfer pump.
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The pressure feed gun is supplied with a 1.4 mm general purpose nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
Specifications:
Requirements: 7 cfm @40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Atomization type: External conventional
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The pressure feed gun is supplied with a 1.4 mm general purpose nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
Specifications:
Requirements: 7 cfm @40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Atomization type: External conventional
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm