- Products
- >
- Air Spray Gun
- >
- A-910S SS Gun with PPS
A-910S SS Gun with PPS
SKU:
L015017
CA$0.00
Unavailable
per item
This is a high quality conventional spray gun designed for use with the new waterborne products. The A-910 SS features all stainless steel internal fluid passages, fluid fittings, needle and nozzle. Featured on the suction version is the 3M PPS container system which is fully compatible with all products and allows spraying at any angle without fan flutter. The disposable liner makes clean up fast and easy!
Price: $223.99 USD plus shipping.
Please call 1-866-8LEMMER (1-866-853-6637) or email [email protected] for detailed shipping costs.
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The suction feed gun comes with a 850 ml container and can also be used with an optional remote pressure pot. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The suction gun is supplied with a 1.8 mm general purpose nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
• Spray at any angle
Specifications:
Requirements: 7 cfm @ 40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Container size: 850 ml
Atomization type: External conventional
Shipping size (inch): L 9 x W 6 x H 5
Shipping weight: 3 lbs (1.3kg)
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
• Spray at any angle
Specifications:
Requirements: 7 cfm @ 40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Container size: 850 ml
Atomization type: External conventional
Shipping size (inch): L 9 x W 6 x H 5
Shipping weight: 3 lbs (1.3kg)
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm