Pressure Pot 2.25 Gallon with Air Agitator Kit A-910P 1/4" x 25'
SKU:
L011071
CA$0.00
per item
This kit includes an A-910P conventional air spray gun with 1.8mm needle and 1/4" x 25' twin hose.
The heavy duty commercial paint pressure pot is inexpensive and easy to use and provides a steady material flow for air guns. Will resist tipping and is easy to clean with an inner Teflon coated pot and removable liner. For use with all standard coatings such as: lacquer, enamel, stain, latex, epoxy, glue, etc.
A one gallon paint can will fit inside. The air motor is heavy duty, powerful and speed controlled by an air flow valve.
Price: $932.99 USD plus shipping.
Please call 1-866-8LEMMER (1-866-853-6637) or email [email protected] for detailed shipping costs.
The A-910 have a Spray fan width control who is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet.
A-910P Specifications:
Requirements: 4-10 cfm @60psi
PSI input (typical): 30 - 60 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Atomization type: External conventional
2.25 Pressure Pot Specifications
Air requirement: 1/10 to 8 cfm (depending on the air adjustment of the agitator)
Maximum pressure: 50 psi
Air inlet: 1/4" NPS-M
Air outlet: 1/4"NPS-M
Fluid outlet: 3/8" NPS-M
Air regulator: dual w/gauges
Gallon can fits inside: Yes
Twin Hose Specification
1/4" x 25'
The air hose in this kit is made from tough, solvent and wear resistant EPDM rubber. The fluid hose has a strong outer jacket and is lined with a smooth layer of solvent proof polyethylene/thermoplastic for fast cleaning and maximum durability.
A-910P Specifications:
Requirements: 4-10 cfm @60psi
PSI input (typical): 30 - 60 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Atomization type: External conventional
2.25 Pressure Pot Specifications
Air requirement: 1/10 to 8 cfm (depending on the air adjustment of the agitator)
Maximum pressure: 50 psi
Air inlet: 1/4" NPS-M
Air outlet: 1/4"NPS-M
Fluid outlet: 3/8" NPS-M
Air regulator: dual w/gauges
Gallon can fits inside: Yes
Twin Hose Specification
1/4" x 25'
The air hose in this kit is made from tough, solvent and wear resistant EPDM rubber. The fluid hose has a strong outer jacket and is lined with a smooth layer of solvent proof polyethylene/thermoplastic for fast cleaning and maximum durability.